The Best Brake Repair and Service in Greenwood Village ColoradoGet To Know How Much Saul's AUTOTEK Knows About Brakes!
Call 303-919-7769 SEVEN days a week to schedule.
I’m Saul Reisman, here at Saul’s Automotive.
Now, there’s many different kinds of brakes, many different styles, many different vehicles, and they way they work, function, and specifically in Colorado, with our mountains, the way they wear out.
So, rather than doing one quick, simple report to just try and give you a little information, we’re gonna be doing a whole series about how these brake systems work on your vehicle and how we can best keep you safe. Scroll down this page to read and view our brake repair video blogs.
On modern vehicles, there are four basic types of braking systems: your disc brake can operate as a single-plane rotor, a dual-plane rotor, a hatted rotor, or an encapsulated-bearing rotor. We’ll be going through all of these in our brakes blog you can see below.
If you have any concerns with your brakes in any way, shape, or form, Saul’s Automotive is open 365 days a year from eight to six to address these concerns. We do not charge for any kind of system diagnostic. We are more than happy to pick your vehicle up, remove the wheels to inspect the brakes, and confirm the exact condition of each and every component at no charge to you so that we can help ensure your safety and the longevity of your braking system.
Please give us a call at 303-919-7769.
Get To Know How Much We Know About Brakes And Brake Repair By Watching Our Brake Video Blogs Below:
One of the least inspected braking systems on your vehicle is typically the parking brake. As 90 percent of vehicles sold in North America come equipped with automatic transmissions, the majority of us don’t even use our parking brake anymore because we don’t think we need to.
The next brake rotor design we’re gonna look at is what we call a dual-plane or a vented rotor.
Now, this rotor has two separate sides with a slot between them that has angled vents, so as it rotates, air flow can cool the rotor much more efficiently.
The first brake rotor design that we’re going to look at is the original single-plane rotor. Now the design of this is pretty basic. In this case it has five bolt holes where it will slide on to the hub of the vehicle.
Hi there. I’m Saul here at Saul’s Automotive, and we’re gonna take a look today at a slightly more heavy duty for a medium to heavy duty truck or van, brake rotor, and braking capsulated hub design.
There are many different repairs that a vehicle might need that are related to brakes. The components of the brake system that might typically need maintenance are:
For a typical brake repair on most Denver vehicles, we replace brake pads and resurface rotors. When we perform this service we use an on-car brake lathe. What this means is we do not remove the rotors from the vehicle, rather we put a machine on the vehicle that performs the service right there. The main benefit to this is it removes almost all run-out in the rotor as it is in relation to the vehicle hub. Because of this, it removes vibration when applying the brakes.
Another common repair that needs to be done with brakes is simply resurfacing the rotors. If you notice a vibration when you apply the brakes then you may need to have this done. Again we use the on-car brake lathe to put a new finish on the rotors and remove the run-out. If the brake pads are still good they may not need to be replaced during this service. If the pads are close to being worn, it usually saves money to replace them at the same time.
In some circumstances, it may be necessary to replace the rotors rather than resurface them. The common causes for this include but are not limited to:
Brake Pads went “metal to metal” meaning there was no friction material left
Many European manufactured vehicles have non-serviceable brake rotors
Rotors are under manufacturer specification for thickness
Calipers generally will only need to be replaced if they have been in a corrosive environment and do not move correctly. This is not a very common part to need to be replaced on a Colorado vehicle, however, it does happen from time to time.
In many instances when you perform repairs or maintenance to the brake system you should also change the brake fluid. When you apply the brakes a large amount of friction is created at the wheels to slow you down. With this friction becomes heat. Heat will cause the brake fluid to break down in the calipers and wheel cylinders and can lead to more expensive repairs later on.